I really hate to put this one up for sale, but I have too many projects and "sort of" projects at this point, and not enough time and room.
1988 Dodge Ram50 extended cab with a 2.6L and a 5 speed manual. Here's the build thread. For a TL/DR, I bought it after it had been sitting for years, got it running, but have not been able to properly bleed the brakes. Also, the cheap fuel pump I used died. A better quality pump is included in the parts that go with it, and should be able to be rigged to allow it to be driven onto a trailer.
New parts over the last year:
- Coil/ballast resistor
- Plugs
- Plug wires
- Weber carb conversion (real Weber, not a clone)
- Most of the brake hydraulics
- Used 15" tires with date codes from this decade (original 14" wheels/tires come with it, too).
The bad:
- It's an Ohio truck that has been sitting for years. I'm sure once it is running and stopping, more will need to be done.
- The rockers are rusty, but still exist. (Maybe this should be considered good)
- The interior still needs a thorough cleaning.
Asking $500. Not overly interested in trades, but I'd consider partial trades in the form of a decent 110V drill press or a floor hydraulic press. No cars, unless you have a dead C4 Corvette with a good body. Otherwise, any potential trade has to take up less space than the truck does. Located in southwest Ohio just a little east of Cincinnati. I do have the title in my name.
